Dennis HilkLinux diagnosticsDE

Input & other peripherals

HID multitouch protocol family

Multitouch support is a specialized HID interpretation layered over transports such as USB or I2C.

Editorial source review: Share public profileOpen in the identification tool
On this page
  1. Overview & identity
  2. Driver & binding
  3. Firmware
  4. Read-only diagnostics
  5. Limitations & related issues
  6. References

Overview & identity

This is a documented HID-group profile, not a vendor/product match. HID_GROUP_MULTITOUCH and related groups are kernel classifications; USB class 03 alone does not prove multitouch capability.

This is an explicit class, transport or driver-context profile. It is not an exact numeric product match.

A numeric match establishes a candidate family within the reviewed evidence. Marketing names, board variants, subsystem conditions and successful operation remain separate questions.

Driver & binding

hid_multitouch parses contact reports and exposes touch input. Its table includes generic multitouch-group matches as well as device quirks. USB or I2C transport binding is necessary context but cannot replace the HID-layer observation.

  • hid_multitouch — kernel driver/module candidate

Detected, bound, operational: learn the difference

Firmware

Device/revision dependent

No external firmware filename was established in the checked driver path. This does not describe firmware stored inside the device.

Inspect firmware packaging on your distribution

Read-only diagnostics

Run one displayed command at a time. Replace uppercase placeholders with the affected device, interface or module from your own output. Commands are never executed here. Read-only output can still contain private identifiers.

Inspect HID-layer bindings

ls -l /sys/bus/hid/devices/*/driver

Read HID driver symlinks without sudo. Correlate the HID path with its parent USB/I2C device before assigning a driver; a generic HID driver and a transport driver describe different layers.

Inspect input handlers and capabilities

cat /proc/bus/input/devices

This reads the input registry without sudo and does not capture keystrokes. Names, handlers and bus information help associate event nodes with hardware; a device entry alone does not prove desktop routing or correct calibration.

Limitations & related issues

The family hint cannot determine touchpad versus touchscreen behavior, gesture policies or orientation. Firmware quirks and userspace palm rejection are separate questions from a successful transport probe.

These guides are linked for relevant observations, not as known defects of every device in this family.

Choose a hardware diagnostic workflow · Inspect a log excerpt in Fix Lab

References

Source review records a checked implementation or document, not a reproduced hardware test. Version-specific tables do not establish a minimum kernel or guaranteed operation.