Dennis HilkLinux diagnosticsDE

Ethernet & networking

Intel 82599 SFP family

An ixgbe 82599 physical-function identity with a pluggable-media path. It is useful for separating an SFP/cable negotiation problem from absence of the network driver.

Editorial source review: Share public profileOpen in the identification tool
On this page
  1. Overview & identity
  2. Driver & binding
  3. Firmware
  4. Read-only diagnostics
  5. Limitations & related issues
  6. References

Overview & identity

10fb is named 82599_SFP in the driver header. The pair does not determine whether an actual board has one or two ports, nor the identity of a fitted transceiver.

Curated identifiers
pci 8086:10fb

A numeric match establishes a candidate family within the reviewed evidence. Marketing names, board variants, subsystem conditions and successful operation remain separate questions.

Driver & binding

ixgbe maps this entry to board_82599. The driver documentation describes 82599 optics restrictions and back-to-back speed considerations; transceiver acceptance is distinct from PCI support.

  • ixgbe — kernel driver/module candidate

Detected, bound, operational: learn the difference

Firmware

No host payload established here

No host-loaded firmware filename was established for this profile in the reviewed driver sources. EEPROM/NVM on the adapter is separate from files installed in the operating system.

Inspect firmware packaging on your distribution

Read-only diagnostics

Run one displayed command at a time. Replace uppercase placeholders with the affected device, interface or module from your own output. Commands are never executed here. Read-only output can still contain private identifiers.

Check the PCI function and bound driver

lspci -nnk -s BDF

Replace BDF with the domain:bus:device.function address. Look for [8086:10fb] and Kernel driver in use. ixgbe in Kernel modules is only a candidate, not proof of binding.

Identify the network interface driver

ethtool -i INTERFACE

Replace INTERFACE with the real interface name. Driver and bus-info connect this interface to its device. A displayed firmware-version is adapter information; it does not prove a file was loaded. Candidate: ixgbe.

Compare supported modes with the current link

ethtool INTERFACE

Supported/advertised link modes describe capability or negotiation offers. Speed, Duplex and Link detected describe the current link, not measured throughput. An unsupported query is a limitation of the interface/driver.

Separate PCIe transport from Ethernet speed

sudo lspci -vv -s BDF

Elevated access may be needed. Root can expose the full PCI configuration. If PCIe capabilities exist, compare LnkCap with LnkSta: maximum and negotiated PCIe speed/width are different from Ethernet speed. Legacy PCI or virtual functions may omit these fields.

Limitations & related issues

A supported PCI ID does not guarantee that arbitrary optical modules or DAC cables are accepted. PCIe LnkSta describes the host-side connection and must not be read as the Ethernet link rate.

These guides are linked for relevant observations, not as known defects of every device in this family.

Choose a hardware diagnostic workflow · Inspect a log excerpt in Fix Lab

References

Source review records a checked implementation or document, not a reproduced hardware test. Version-specific tables do not establish a minimum kernel or guaranteed operation.