Overview & identity
1102:0002 matches the checked EMU10K1 entry. Related Audigy identities have different PCI IDs; this pair alone does not select an exact Sound Blaster board or its connector layout.
- Curated identifiers
pci 1102:0002
A numeric match establishes a candidate family within the reviewed evidence. Marketing names, board variants, subsystem conditions and successful operation remain separate questions.
Driver & binding
snd_emu10k1 is the family candidate and supports a richer internal mixer/DSP route than a simple single-output PCM device. A present ALSA card can coexist with muted or unintended playback routing.
snd_emu10k1— kernel driver/module candidate
Firmware
No host payload established here
No external firmware filename was established in the checked driver path. This does not describe firmware stored inside the device.
Read-only diagnostics
Run one displayed command at a time. Replace uppercase placeholders with the affected device, interface or module from your own output. Commands are never executed here. Read-only output can still contain private identifiers.
Inspect the PCI function and binding
lspci -nnk -s BDFReplace BDF with the complete address, for example 0000:00:14.0. This read-only query needs pciutils and normally no sudo. “Kernel driver in use” is observed binding; “Kernel modules” lists candidates.
List kernel ALSA cards
cat /proc/asound/cardsRead the current ALSA card list without sudo. Card indexes can change after reboot; an existing card does not yet establish the selected desktop output or usable wiring. A missing file can also reflect unavailable procfs/ALSA support.
List playback PCM endpoints
aplay -lThis read-only alsa-utils listing normally needs no sudo and does not play audio. Compare card/device numbers with the card list; a PCM endpoint is separate from a PipeWire profile and mixer state.
Limitations & related issues
The ID table establishes a candidate, not tested surround, MIDI or digital output compatibility. Board-specific connectors and actual mixer state remain runtime questions.
These guides are linked for relevant observations, not as known defects of every device in this family.
- Sound goes to the wrong or muted output · First documented next step
- S/PDIF stays silent or passthrough fails · First documented next step
Choose a hardware diagnostic workflow · Inspect a log excerpt in Fix Lab
References
Source review records a checked implementation or document, not a reproduced hardware test. Version-specific tables do not establish a minimum kernel or guaranteed operation.
- Linux: sound/pci/emu10k1/emu10k1.c
Reviewed upstream source
PCI_VDEVICE(CREATIVE, 0x0002) - Linux: Documentation/sound/alsa-configuration.rst
Project or distribution documentation
Module snd-emu10k1 - Linux: include/linux/pci_ids.h
Reviewed upstream source
PCI_VENDOR_ID_CREATIVE